Testing Extensions¶

Before you deploy your extension in production or release it to the public, you’ll want to ensure it’s properly tested and works as expected. A great way to do this is to write unit tests for your extension, which will ensure not only that your extension works now, but will continue to work in the future with newer versions of Review Board.

Writing Extension Unit Tests¶

Extension test cases work like most any other test cases in Python. You’ll create a tests.py file, or files starting with tests_ inside a tests directory, and build test suites in there. See the unittest documentation for more information on Python unit testing.

For extension tests, you’ll want to use reviewboard.extensions.testing.ExtensionTestCase as your base class. You’ll also need to define the extension class being tested, as a class attribute.

For example:

from reviewboard.extensions.testing import ExtensionTestCase

from my_extension.extension import MyExtension


class MyExtensionTests(ExtensionTestCase):
    extension_class = MyExtension

    def test_something(self):
        self.assertEqual(self.extension.some_call(), 'some value')

Extensions may want to create a base class that defines the extension_class attribute, and subclass that for all individual test suites. For example:

from reviewboard.extensions.testing import ExtensionTestCase

from my_extension.extension import MyExtension

class MyExtensionTestCase(ExtensionTestCase):
    extension_class = MyExtension

class MyExtensionTests(MyExtensionTestCase):
    def test_something(self):
        self.assertEqual(self.extension.some_call(), 'some value')

As you can see above, tests will have access to an extension attribute. This will be an instance of your extension, registered and enabled. You can call any function on it.

Next, we’ll focus on some ways you can test your extension.

Testing Initialization¶

Your unit test functions will be run after your extension has been instantiated and enabled. If you need to check that everything was set up right, you can simply create a test function for that and check the state.

You may want to run some code before an extension is enabled, to make sure you can impact some of the initialization state beforehand. For example, you may want to set some Review Board settings first. You can do this in one of two ways:

Override ExtensionTestCase.setUp(), set up your code, and then call the parent function to trigger the extension initialization:

class MyExtensionTests(MyExtensionTestCase):
    def setUp(self):
        # Your pre-initialization setup goes here.

        super(MyExtensionTests, self).setUp()

Disable the extension in your test, set up some state, and then re-initialize it:

class MyExtensionTests(MyExtensionTestCase):
    def test_init(self):
        self.extension_mgr.disable_extension(self.extension.id)

        # Your pre-initialization setup goes here.

        self.extension = \
            self.extension_mgr.enable_extension(self.extension.id)

Tip

If you want to check that certain functions were called during initialization, use our kgb module, which provides function spies for unit tests.

You can use this to test whether certain functions were called, and with what arguments, and how many times. You can also override functions safely, helping simulate different behavior or provide hard-coded results from functions (even those provided by Python, Review Board, or other third-party modules).

Testing Shut Down¶

After your unit test has run, the extension will be shut down (if not already shut down by the unit test).

If you’re manually registering/unregistering state, you’ll want to test this. You can do this by creating a test function that disables the extension and then checks the state.

class MyExtensionTests(MyExtensionTestCase):
    def test_init(self):
        self.extension_mgr.disable_extension(self.extension.id)

        # Check the extension state here.

Testing Signal Response¶

If your extension responds on behalf of signals, you can easily emit those signals in order to simulate behavior. Tests are run in a sandbox, so you can manipulate database state all you want without breaking other tests.

Let’s say your extension listens to the review_request_published signal. You can trigger your extension’s behavior by manually emitting the signal:

from django.contrib.auth.models import User
from reviewboard.reviews.models import ChangeDescription, ReviewRequest
from reviewboard.reviews.signals import review_request_published


class MyExtensionTests(MyExtensionTestCase):
    def test_review_request_published_handler(self):
        # In a real test, you'll want to set state for these objects.
        user = User(...)
        changedesc = ChangeDescription(...)
        review_request = ReviewRequest(...)

        # Trigger the signal.
        review_request_published.emit(user=user,
                                      review_request=review_request,
                                      changedesc=changedesc,
                                      trivial=False)

        # Check the extension's state or behavior here.

Tip

Once again, kgb is useful here for checking that handlers were called, and for preventing unwanted methods from being triggered in response to the signals.

Running Unit Tests¶

Review Board comes with a helpful program to run your extension’s unit tests: rbext test. This is given one or more top-level Python modules containing extensions and unit tests that you want to run, like so:

$ rbext test -e myextension.exension.MyExtension

That would set up your extension in a test environment and run any unit tests found in myextension.tests, myextension.submodule.tests, myextension.anothermodule.tests.test_foo, etc.

Running Subsets of Tests¶

Running all unit tests may take a while. To speed up unit testing, there are options to run subsets of tests.

To run only the tests in a specific module:

$ rbext test -e myextension.extension.MyExtension \
  myextension.submodule.tests

To run the tests in a specific class:

$ rbext test -e myextension.extension.MyExtension \
  myextension.submodule.tests:MyTests

To run only a specific test case:

$ rbext test -e myextension.extension.MyExtension \
  myextension.submodule.tests:MyTests.test_foo

Showing Test Coverage¶

When writing unit tests, it’s important to know whether your unit tests were comprehensive, covering the various cases in the code you’ve written. With our test suites, you can generate a coverage report which will show all the files in the project, how many statements were executed or missed, the line ranges not yet covered under the executed tests, and the coverage percentages.

This looks like:

Name                          Stmts   Miss  Cover   Missing
-----------------------------------------------------------
myextension/extension.py         17      7    59%   13, 17, 21, 29, 38
myextension/utils.py             19     14    26%   6-28, 40
[...]

-----------------------------------------------------------
TOTAL                          1787    651    64%
----------------------------------------------------------------------
Ran 39 tests in 0.168s

You can generate a coverage report by passing --with-coverage when executing tests. For example:

$ rbext test -e myextension.extension.MyExtension --with-coverage
$ rbext test -e myextension.extension.MyExtension --with-coverage \
  myextension.submodule.tests

Cached information previous test runs are stored in the .coverage file in the top-level of the source tree. The test runners use this to show you a more comprehensive coverage report. You can erase this file to generate fresh coverage reports for your next test run.

See the nose coverage documentation for more information.

Additional Testing Options¶

Our test runner is based off nose, which provides a large number of useful options for working with unit tests. You can enable them by specifying -- <nose options> (Note the space after the --).

For example, to run only the tests that failed last time:

$ rbext test -e myextension.extension.MyExtension -- --failed

See the nose usage guide for more information.

Custom Test Settings Files¶

When running unit tests, rbext will put together a settings_local.py file with your extension modules and their submodules added to INSTALLED_APPS, allowing their models, admin state, etc. to be registered.

If you need a full custom environment, you can create a test settings file.

This can be named anything, but we recommend calling this test_settings.py and placing it somewhere in your source tree outside of your extension’s modules. You’d then specify this using -s.

For example:

$ rbext test -s test_settings.py -e myextension.extension.MyExtension