Storing/Accessing Extra Data¶

Many API resources have a special field called extra_data, which is a JSON document that can contain arbitrary data for use by extensions or clients of the API. You are free to store data in this field, and we have three ways of doing that:

Storing/merging JSON data
Patching JSON data
Simple key/value assignment

When storing data specific to your tool/script/extension, we recommend prefixing any top-level keys with some vendor identifier, like vendorname-key, or even nesting all data in a top-level vendor key.

Some keys may not be writable or even readable. See Access Restrictions for more information.

Storing/Merging JSON Data¶

New in version 3.0.

JSON documents can be stored by using a JSON Merge Patch. This is a simple method of specifying new JSON data to merge in. Any objects in the data will be merged together, and anything else (arrays, strings, booleans, etc.) will be replaced by the newly-supplied data. Anything set to null will be removed.

To supply the data to merge in, supply the new serialized JSON document in the extra_data:json field, like so:

extra_data:json={
    "myvendor": {
        "mytool": {
            "array_to_replace": [1, 2, 3],
            "key_to_remove": null,
            "maybe_existing_object": {
                "a": 1,
                "b": "test",
                "c": false
            }
        }
    }
}

In this example, we’re merging data into beanbag.mytool (keeping any existing data in those objects), replacing the array_to_replace key with a new array, removing the key_to_remove key, and merging in some more data into maybe_existing_object. The objects will be created if they don’t already exist.

Note

The example above shows the JSON data spread across multiple lines. In practice, when sending this via the API, the JSON data should ideally be condensed to a single line.

This is also sent as HTTP Form Data, like any other field being set in the API.

When merging in new JSON data, the following rules are followed:

extra_data itself cannot be replaced (for instance, supplying extra_data:json=[] will fail).
If a new key does not match an existing key in extra_data, it will be added.
If a new matches an existing key in extra_data, and the new value is null, the key will be removed.
If a new key matches an existing key in extra_data, and either the old or new value is not an object, the old value will be replaced with the new one.
If a new key matches an existing key in extra_data, and both the old and new value is an object, the object will be merged using these rules.

While objects are merged together, arrays are not. To update existing arrays, you will want to patch extra_data instead.

Patching JSON Data¶

New in version 3.0.

extra_data fields also support a more advanced form of modification in the form of a JSON Patch. These patches supply a list of operations to perform, which may consist of adding new keys, replacing old ones, inserting into arrays, copying/moving keys, and even testing for the existence of certain data (aborting the patch if not found).

To patch extra_data, set a serialized JSON Patch in the extra_data:json-patch field. For example:

extra_data:json-patch=[
    {
        "op": "add",
        "path": "/myvendor/mytool/new_key",
        "value": "new-value"
    },
    {
        "op": "remove",
        "path": "/myvendor/mytool/key_to_remove",
    },
    {
        "op": "replace",
        "path": "/myvendor/mytool/existing_key",
        "value": "new-value"
    }
]

This example shows just a few of the operations, the addition of a brand-new key, the removal of an existing key, and replacing the value for an existing key. These operations all work on paths (documented below), which specify a location within a JSON document.

If any operation in a patch were to fail (due to a non-existent key, or some other conflict), no part of the watch will apply, and the API request will fail with an Invalid Form Data error.

Operations¶

Add¶

Data can be added to an object or an array through the add operation. It takes the form of:

{
    "op": "add",
    "path": "/path/to/key/or/index",
    "value": "new value"
}

If the key at the path already exists, it will be replaced. Otherwise, it will be created.

The new value can be simple data like a string or number, or it can be a complete JSON document by itself.

Remove¶

Data can be removed from an object or array through the remove operation. It takes the form of:

{
    "op": "remove",
    "path": "/path/to/key/or/index",
}

If the path does not exist, the patch will fail.

Replace¶

Existing data in an array or key can be replaced with a new value through the replace operation. It takes the form of:

{
    "op": "replace",
    "path": "/path/to/key/or/index",
    "value": "new value"
}

If the path does not exist, the patch will fail.

The new value can be simple data like a string or number, or it can be a complete JSON document by itself.

Copy¶

Data can be copied from one location (such as an object or array) to another location anywhere in extra_data through the copy operation. It takes the form of:

{
    "op": "copy",
    "from": "/path/to/source/key/or/index",
    "path": "/path/to/new/key/or/index"
}

If the “from” path does not exist, or the destination path cannot be written to, the patch will fail.

Move¶

Data can be moved from one location (such as an object or array) to another location anywhere in extra_data through the move operation. It takes the form of:

{
    "op": "move",
    "from": "/path/to/source/key/or/index",
    "path": "/path/to/new/key/or/index"
}

If the “from” path does not exist, or the destination path cannot be written to, the patch will fail.

Test¶

A patch can sanity-check that there’s some expected data already stored in extra_data. If that data is not present as expected, the patch will fail.

{
    "op": "test",
    "from": "/path/to/source/key/or/index",
    "value": "expected value"
}

Specifying Paths¶

All patch operations take at least one path, using the JSON Pointer specification. These paths specify a location within a JSON document, using / to separate object keys and array indices.

Paths always begin with a /.

To specify an object key, just list the key name.

To specify an index in an array, specify the 0-based index of the array. If you want to specify the tail end of an array (for the purposes of appending to an array), use the special - character instead of a numeric index.

Special Escape Characters¶

If you need to reference a key with a / or ~ in the name, you’ll need to use a special escape character.

To specify a key containing /, use ~1 instead.

To specify a key containing ~, use ~0 instead.

Examples¶

Here are some examples of paths:

/myvendor/mytool/mykey
/myvendor/mytool/myarray/2
/myvendor/mytool/myarray/2/nested-key
/myvendor/mytool/myarray/-
/myvendor/mytool/-1
/myvendor/mytool/-0/nested-key

Simple Key/Value Assignment¶

If you need to store top-level data directly in extra_data, you can use simple assignments in the form of:

extra_data.mykey=myvalue

The value can be a string, a numeric value (integer or floating-point), or a boolean (true or false, case-insensitive). Anything that doesn’t look like a number or boolean is considered a string.

If an empty value is provided for a key, and the key already exists in extra_data, it will be removed.

Note

This is a legacy way of working with extra_data, available for versions prior to Review Board 3.0. It has limitations, like being unable to work with nested keys, unable to store complex JSON documents, and unable to store strings that look like numbers or booleans.

If targeting Review Board 3.0 or higher, we recommend using the more modern merging or patching methods instead.

Access Restrictions¶

There are certain keys that, if present in extra_data, will not be shown to clients and cannot be modified.

First, any key starting with double underscores (__) is considered private for internal use by Review Board or extensions only. API clients cannot see these keys or anything underneath them.

Extensions may also mark some keys as read-only or private by making use of APIExtraDataAccessHook. This allows extensions (while enabled) to limit what API clients are able to do.

Finally, some API resources may impose their own limitations on certain keys.